ForceFront Blast™ E/T34000 Storefront

ForceFront Blast: Entrances –Wide Stile | Storefront- E/T34000 | Curtainwall – 2 1/2″force-blast-storefront-header

Introducing ForceFront Blast™ E/T34000 Storefront

Tubelite 34000 Series Framing is a 2-1/2″ x 5″ flush glazed storefront system for use on low-rise single-span applications for resistance to bomb blast. This screwspline framing is designed to be glazed with 1 5/16″ laminated glass positioned in the center of the frame. 34000 meets the requirements of ASTM, GSA ISC and DoD requirements. ForceFront Monumental Wide Stile Entrance Doors complete the 34000 storefront system providing a complete system that’s easy to fabricate and install.

  • Static [ASTM E 331] and Dynamic [AAMA 501.1] Water @ 15 psf.
  • Air Infiltration [ASTM E 283] 0.03cfm/ft2 @ +6.24 psf
  • Design Pressure
    +70/-68 psf with Silicone Glazed interior seal
  • Large & Small Missile Impact Test
  • Blast Resistance Criteria
    • Anaylzed in accordance with UFC 4-010-01 [Oct 2013] & ASTM F2248
    • 148 Ft standoff – Charge weight I
    • 82 Ft standoff – Charge weight II
    • Each project must be analyzed separately for compliance based on its unique factors

ForceFront Monumental Entrance Doors

  • +/- 50psf cyclic loading for 4’0″ x 8’0″ single doors thru 8’0″ x 8’0″ pairs
  • Forced Entry Test [AAMA 1304-02]

GET THE POINT!™

E34000 Storefront can help with the following LEED points:

  • MR 4.1 & 4.2 Recycled Content
  • EQ 8.1 & 8.2 Daylight & Views
34000 ForceFront Blast Storefront
System Profile Size Water
Infiltration
Static & Dynamic
Test Pressure Thermal Performance Blast Rating Sound Transmission Inside HVHZ
– Approved
ForceFront-Blast
NonThermal SF E34000
-Wet Seal
1/2” x 5″ 15
psi (TAS202)
+50/-50 (PVB)
+70/-68 (VSO2/SG)
NA Charge Weight I/II 148’/82’ standoff
(per design based analysis)
 36 STC  No
ForceFront-Blast
Thermal SF T34000
-Wet Seal
1/2” x 5″ 15
psi (TAS202)
+50/-50 (PVB)
+58/-55 (VSO2/SG)
CRF – 59 OS
U-value 0.37 OS
Charge Weight I/II 148’/82’ standoff
(per design based analysis)
32 OTC No

34000 ForceFront Blast Storefront

System Profile Size Water
Infiltration
Static & Dynamic
Test Pressure Thermal Performance Blast Rating Sound Transmission InsideHVHZ – Approved
ForceFront-Blast
NonThermal SF E34000
-Wet Seal
1/2” x 5″ 15
psi (TAS202)
+50/-50 (PVB)
+70/-68 (VSO2/SG)
NA Charge Weight I/II 148’/82’ standoff
(per design based analysis)
36 STC  No
ForceFront-Blast
Thermal SF T34000
-Wet Seal
1/2” x 5″ 15
psi (TAS202)
+50/-50 (PVB)
+58/-55 (VSO2/SG)
CRF – 59 OS
U-value 0.37 OS
Charge Weight I/II 148’/82’ standoff
(per design based analysis)
32 OTC No