TU24650

Providing condensation resistance
even in extreme cold weather

TU24650

Providing condensation resistance even in extreme cold weather

TU24650

Providing condensation resistance even in extreme cold weather

Tubelite’s dual thermally broken storefront line has been expanded and enhanced with the addition of TU24650 Series 2″ x 6-1/2″.

Beauty and Performance

The dual thermal break decreases U-Factors and increases CRF over a single P&D pocket when using the same size and type of insulated glass. Azon’s Lancer® mechanical lock provides long-term resistance to shrinkage of the polyurethane barrier. The glass plane matches that of our 4-1/2″ system depth for a pleasing reveal on the exterior and interior sides of the frame. Seven anodized finishes and 19 standard paint color are available on this storefront framing system to complement any project with warranteed protection, as well as street appeal.

Performance Test Standards
Air Performance ASTM E 283
Water AAMA 501 and ASTM E 331
Structural ASTM E 330
Thermal AAMA 1503
Thermal Break AAMA 505 and AAMA TIR-A8
Acoustical AAMA 1801 and ASTM E 1425

TUBELITE THERML=BLOCK® PRODUCT LINE

System Features

  • TU24650 Ultra-Thermal Storefront is recommended for use on taller ground floor applications and can span openings up to 14 feet high without steel reinforcing. Framing has 3/8″ bite for use with glass or panels up to 1″ thick. Verticals can be steel-reinforced for high performance against strong wind loads. Tubelite 3700 Series operable windows can be glazed into the storefront framing pocket for natural ventilation.
  • This system has dual pour and de-bridge thermal pockets for high performance, but is also available as T24650 single pour and de-bridge thermal system, or as E24650 non-thermal framing.
  • Members can be assembled using screw spline or clip joinery, and framing is compatible with Tubelite’s Medium and Wide Stile Therml=Block™ Doors.
  • Our TU24650 Series Storefront products are subjected to thorough testing by an independent laboratory, ensuring that you get the highest quality storefront framing products that the industry has to offer.

Tubelite’s dual thermally broken storefront line has been expanded and enhanced with the addition of TU24650 Series 2″ x 6-1/2″.

Beauty and Performance

The dual thermal break decreases U-Factors and increases CRF over a single P&D pocket when using the same size and type of insulated glass. Azon’s Lancer® mechanical lock provides long-term resistance to shrinkage of the polyurethane barrier. The glass plane matches that of our 4-1/2″ system depth for a pleasing reveal on the exterior and interior sides of the frame. Seven anodized finishes and 19 standard paint color are available on this storefront framing system to complement any project with warranteed protection, as well as street appeal.

Azon’s Lancer® mechanical lock provides long-term resistance to shrinkage of the polyurethane barrier.

Performance Test Standards
Air Performance ASTM E 283
Water AAMA 501 and ASTM E 331
Structural ASTM E 330
Thermal AAMA 1503
Thermal Break AAMA 505 and AAMA TIR-A8
Acoustical AAMA 1801 and ASTM E 1425

System Features

  • TU24650 Ultra-Thermal Storefront is recommended for use on taller ground floor applications and can span openings up to 14 feet high without steel reinforcing. Framing has 3/8″ bite for use with glass or panels up to 1″ thick. Verticals can be steel-reinforced for high performance against strong wind loads. Tubelite 3700 Series operable windows can be glazed into the storefront framing pocket for natural ventilation.
  • This system has dual pour and de-bridge thermal pockets for high performance, but is also available as T24650 single pour and de-bridge thermal system, or as E24650 non-thermal framing.
  • Members can be assembled using screw spline or clip joinery, and framing is compatible with Tubelite’s Medium and Wide Stile Therml=Block™ Doors.
  • Our TU24650 Series Storefront products are subjected to thorough testing by an independent laboratory, ensuring that you get the highest quality storefront framing products that the industry has to offer.

EXAMPLES >

Baker Center
Minneapolis, MN

TU24650 Series Product Specifications
Application: Low-Rise storefront, center set glass, outside and inside glaze.
Face Width: Overall Depths: Glass
Thickness:
Air Infiltration: Dynamic Water: Structural: U-Value: CRF:* Acoustic: Outside
HVHZ Approved:
2″ 6-1/2″ 1″ std. 0.06 CFM/Ft.2 @ 6.24 PSF 12 PSF

30 PSF

45 PSF
Overload

U-Value Table CRF-Value 31 STC
25 OITC
Yes
FL# 20393.1
TU24650 Series Product Specifications
Application: Low-Rise storefront, center set glass, outside and inside glaze
Face Width: 2″
Overall Depths: 6-1/2″
Glass Thickness: 1” std.
Air Infiltration: 0.06 CFM/Ft.2 @ 6.24 PSF
Dynamic Water: 12 PSF
Structural: 30 PSF, 45 PSF Overload
U-Value: U-Value Table
CRF*: CRF-Value
Acoustic: 31 STC, 25 OITC
Outside HVHZ Approved: Yes – FL# 20393.1

* See Tubelite’s Test Reports for mock up sizes and test conditions.
1 Glass Type = 1/4″ SB70XL #2 / 1/2″ Air / 1/4″ Clear. COG U-factor = 0.29. Results obtained from AAMA 507 reports unless otherwise noted. All results represent NFRC 100 standard opening sizes of 78.74″ x 78.74″ for frames and 75.59″ x 82.28″ for doors.

Guide Specification
CAD File
      TU24650    |   
      Sunshades    |   
BIM Models
Design Manual
Installation Instructions
Windload Charts
      Captured
      SSG
Safety Data Sheets
Tubelite Sample Warranty
Air-Water-Structural
      Captured
      SSG
CRF
      Captured
      SSG
NFRC 100-200-500
Acoustic