TU24000 Dual Pocket Poured & Debridged Thermal Storefront

Therml=Block | Entrances – Therml=BlockTerraPorte 7600 | Storefront – TU24000 |TU24650  | Curtainwall – 400TU | 300ES | 900RW

thermal-header-storefront

Tubelite’s most popular thermally broken storefront line has been expanded and enhanced with an additional P&D thermal break pocket. The TU24000 Series has the same 2” x 4 1/2” profile as the T14000 system, and offers standard screw-spline or shear block joints.

Beauty and Performance

The dual thermal break decreases U-Factors by 16% and increases CRF by 30% over a single P&D pocket when using the same size and type of insulated glass. Azon’s Lancer® mechanical lock provides long-term resistance to shrinkage of the polyurethane barrier. Glass is centeredin the 4 1/2” system depth for a pleasing reveal on the exterior and interior sides of the frame. Seven anodized finishes and 20 standard paint color are available on this storefront framing system to complement any project with warranteed protection, as well as street appeal.

 
Performance Test Standards
Air Performance ASTM E 283
Water AAMA 501 and ASTM E 331
Structural ASTM E 330
Thermal AAMA 1503
Thermal Break AAMA 505 and AAMA TIR-A8
Acoustical AAMA 1801 and ASTM E 1425
tu24000
TU24000 Dual Pocket Poured & Debridged Thermal Storefront is recommended for use on ground floor storefront or protected low-rise applications. Framing has 1/2” bite for use with glass or panels up to 1″ thick. Verticals can be steel-reinforced for high performance against strong windloads. Tubelite 3700 Series operable windows can be glazed into the storefront framing pocket for natural ventilation.

Members can be assembled using screw spline or clip joinery, and framing is compatible with Tubelite’s Medium and Wide Stile Therml=Block™ Doors.

Our TU24000 Series Storefront products are subjected to thorough testing by an independent laboratory, ensuring that you get the highest quality storefront framing products that the industry has to offer.

TU24000 Series Product Specifications
Application: Face Width: Overall Depths: Glass
Thickness:
Air Infiltration: Dynamic Water: Structural Overload: CRF*: U Value1: Sound Transmission: Outside HVHZ

Approved:
Low-Rise storefront,
center set glass,
inside/outside glazed
2″,
4 1/2
4 1/2 1” 0.06 CFM/Ft.2@ 6.24 PSF 12 PSF 45 PSF 69 – OS 0.29 – OS 37 STC
31 OITC
Yes
FL16539
TU24000 Series Product Specifications
Application: Low-Rise storefront, center set glass, inside/outside glazed
Face Width: 2″, 4 1/2
Overall Depths: 4 1/2
Glass Thickness: 1”
Air Infiltration: 0.06 CFM/Ft.2@ 6.24 PSF
Dynamic Water: 12 PSF
Structural Overload: 45 PSF
CRF*: 69 – OS
U Value1: 0.29 – OS
Sound Transmission: 37 STC, 31 OITC
Outside HVHZ – Approved: Yes – FL16539
* See Tubelite’s Test Reports for mock up sizes and test conditions.
1 Glass Type = 1/4″ SB70XL #2 / 1/2″ Air / 1/4″ Clear. COG U-factor = 0.29. Results obtained from AAMA 507 reports unless otherwise noted. All results represent NFRC 100 standard opening sizes of 78.74″ x 78.74″ for frames and 75.59″ x 82.28″ for doors. 
TU24000 Series Technical Data
Technical Data Index: Click to go to index
Material Safety Data Sheets: ZIP File
CAD File (DWG): PDFZIP
BIM Models: Zip File
Details: PDF
Installation Instructions: PDF | Glazing Chart
Specs: PDF
Word File
Windload Charts: PDF

 

TU24000 Spec Sheet
Tubelite-TU24000-Spec-Sheet-2015-Web-1 PDF File